DeDietrich EMC-M 30/35 MI Service Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
Initial pressure of the
expansion vessel
Volume of the expansion vessel depending on the volume of the installation (in litres)
100 125 150 175 200 250 300 > 300
0.5 bar 4,8 6,0 7,2 8,4 9,6 12,0 14,4 Volume of the installation x 0,048
1 bar
8,0
(1)
10,0 12,0 14,0 16,0 20,0 24,0 Volume of the installation x 0,080
1.5 bar 13,3 16,6 20,0 23,3 26,6 33,3 39,9 Volume of the installationx 0,133
(1) Factory configuration
4.6.6. Connecting the condensate discharge pipe
The syphon is supplied separately as standard with the boiler
(Includes flexible plastic drain hose). Fit these parts underneath the
boiler. To do this, proceed as follows:
1. Fill the syphon with water up to the mark.
CAUTION
Fill the water siphon before starting the boiler to avoid
combustion products escaping from the boiler.
2.
Press the syphon firmly into the
j
opening provided for it
underneath the boiler. The syphon must click into place.
CAUTION
Check whether the syphon is solidly fitted in the boiler.
3. Mount a standard drainage pipe, Ø 32 mm or more, leading to the
mains drainage system.
4. Mount the flow collector.
5.
Insert the hoses from the siphon drain
j
and safety valve
ê
.
6. Mount a trap or a siphon in the discharge pipe.
CAUTION
Do not make a fixed connection owing to maintenance
work on the siphon.
4 Do not plug the condensate discharge pipe. Make an
open connection with the drain.
4 Set the discharge pipe at a gradient of at least 30 mm
per metre, maximum horizontal length 5 metres.
4 Do not drain condensation water into a roof gutter at
any time.
4 Connect the condensate discharge pipe in
accordance with prevailing standards.
T004860-B
T004868-D
4. Installation EMC-M 24 EMC-M 24/28 MI EMC-M 30/35 MI EMC-M 34/39 MI
22
131112 - 7602023-02
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 79 80

Comments to this Manuals

No comments